 |
Husqvarna
335LS
• Engine: 34.6cc X-Torq
• Cutting diameter: N/A
• Feature: Low fuel consumption and reduced exhaust emissions
www.husqvarna.com |
|
 |
RedMax
BCZ2460TS
• Engine: 24cc Strato-Charged
• Cutting diameter: 19 inches
• Feature: MaxTorque gear case and MaxFlex throttle lever
www.redmax.com |
|
 |
Seago International
Trim-A-Lawn Wheel Trimmer
• Engine: 50cc Tecumseh
• Cutting diameter: 14 inches
• Feature: Open sides allow for trimming and mowing at the same time
www.seagousa.com |
|
 |
Shindaiwa
T254
• Engine: 24.5cc Hybrid 4
• Cutting diameter: 20 inches
• Feature: Speed-Feed head and full anti-vibration system
www.shindaiwa.com |
|
 |
Echo
SRM-280T
• Engine: 28.1cc Power Boost Vortex
• Cutting diameter: 17 inches
• Feature: 16.9-fluid-ounce fuel tank, debris shield with built-in knife
www.echo-usa.com |
|
 |
Efco
DS 2800
• Engine: 1.3 hp, 27cc Emak
• Cutting diameter: 16 inches
• Feature: Burn Right engine reduces fuel consumption and emissions
www.efcopower.com |
|
 |
Gravely
Pro-Trim
• Engine: 6.25 hp, 190cc B&S
• Cutting diameter: 22 inches
• Feature: Reinforced steel pivot head, 14-gauge stamped steel deck
www.gravely.com |
|
 |
Honda
HHT35SLTA
• Engine: 35.8cc Honda GX35
• Cutting diameter: 17 inches
• Feature: Durable flex shaft and ergonomically positioned controls
www.hondapowerequipment.com |
|
 |
Jonsered
GC 2128
• Engine: 1.1 hp, 28cc
• Cutting diameter: N/A
• Feature: Chrome cylinder and three-piece crankshaft
www.usa.jonsered.com |
|
 |
Kawasaki
KGT27C
• Engine: 26.3cc Kawasaki TJ27E
• Cutting diameter: N/A
• Feature: Hollow steel driveshaft, easy-start recoil, heavy-duty air filter
www.kawpower.com |
|
 |
Makita USA
EM2650LH
• Engine: 25.4cc
• Cutting diameter: N/A
• Feature: Steel driveshaft and easily adjustable handle
www.makitatools.com |
|
 |
Stihl
FS 90 R
• Engine: 28.4cc
• Cutting diameter: 16.5 inches
• Feature: Solid driveshaft and TapAction AUTOCUT 25-2 head
www.stihlusa.com |
|
 |
Tanaka
TCS31EBSLP
• Engine: 1.4 hp, 30.8cc
• Cutting diameter: 17 inches
• Feature: Solid steel driveshaft, includes blade and trimmer head
www.tanakapowerequipment.com |
|
 |
Vandermolen
Windmill L4320K
• Engine: 43.2cc Kawasaki
• Cutting diameter: 22 inches
• Feature: Loop handle with safety bar
www.vandermolencorp.com |
|
Featured Edgers
|
 |
E-Z Trench Mfg.
Bedscaper BE400
• Engine: Honda GX200
• Cutting depth: 2, 3 or 4 inches
• Feature: Caster steering for shaping flowerbeds and tree rings
www.eztrench.com |
|
 |
Grasshopper
Edge-EZE
• Engine: Mower attachment
• Cutting depth: 2.5 inches
• Feature: Electric actuator with vertical adjustment up to 12 inches
www.grasshoppermower.com |
|
 |
GreenWorks
GreenWorks 12A Electric Edger
• Engine: 12-amp electric
• Cutting depth: Variable
• Feature: 7.5-inch double-edged blade, spring-assist front wheel
www.greenworkstools.com |
|
 |
Husqvarna
327ES
• Engine: 1.2 hp, 24.5cc E-Tech II
• Cutting depth: 2.68 inches
• Feature: Wear plate under engine and reinforced spark plug guard
www.husqvarna.com |
|
 |
RedMax
HEZ3001S
• Engine: 1.4 hp, 29.5cc Strato-Charged
• Cutting depth: 2.75 inches
• Feature: MaxTorque, die-cast aluminum guard, vibration dampening
www.redmax.com |
|
 |
Seago International
Atom Professional Edger
• Engine: 34cc Redmax, 35cc Honda
• Cutting depth: 4 inches
• Feature: Fully enclosed blade guard and safety trigger interlock
www.seagousa.com |
|
 |
Shindaiwa
LE254
• Engine: 24.5cc Hybrid 4
• Cutting depth: 2.75 inches
• Feature: Purge-pump carburetor and electronic ignition system
www.shindaiwa.com |
|
 |
Turf Teq
1305 Power Edger
• Engine: 13 hp Honda
• Cutting depth: 5 inches
• Feature: Standard opening blade, variety of optional trenching blades
www.turfteq.com |
|
Edgers
|
 |
Echo
PE-265S
• Engine: 25.4cc Power Boost Vortex
• Cutting depth: 2.5 inches
• Feature: Pro-Torque gear case, i-30 starter, replaceable steel wear plate
www.echo-usa.com |
|
 |
Little Wonder
Little Wonder Pro
• Engine: 3.5 hp B&S, 4 hp Honda
• Cutting depth: Up to 4 inches
• Feature: Fingertip controls and 10-inch, reversible blades
www.littlewonder.com |
|
 |
Sweeperman
Edge-N-Blow
• Engine: Tractor-mounted
• Cutting depth: 15 or 18-inch edger
• Feature: PTO-driven blower component mounts to three-point hitch
www.sweeperman.net |
|
Featured Accessories
|
 |
Edgit
The Edgit is an edging guide designed for trimmers. The rolling guide indicates where the string cuts and vertically edges as fast as the operator can walk.
www.edgit.com |
|
 |
W.E. Chapps
The W.E. Trimmer Cover protects engines and fuel tanks. The outer material is water-repellent and resists mildew, abrasions and tears. Three liners available.
www.wechapps.com |
|
Accessories
|
 |
Power Chute Design
The one-piece, ROPS-mounted trimmer rack holds trimmers and edgers. It can be transferred between mowers, with no holes to drill or permanent mounting needed.
www.powerchutedesign.com |
|